black holes :: essays research papers

The Search for Black Holes: Both as a Concept and An Understanding for age’s people have been determined to explicate on everything. Our search for explanation rests only when there is a lack of questions. Our skies hold infinite quandaries, so the quest for answers will, as a result, also be infinite. Since, its interception, Astronomy as a science speculated heavily upon discovery, and only came to concrete conclusions later with closer inspection. Aspects of the skies which at one time seemed like reasonable explanations are now laughed at as egotistical ventures. Time has shown that as better instrumentation was developed, more accurate understanding was attained. Now it seems, as we advance on scientific frontiers, the new quest of the heavens is to find and explain the phenomenon known as a black hole. The goal of this paper is to explain how the concept of a black hole came about, and give some insight on how black holes are formed and might be tracked down in our more technologically advanced future. Gaining an understanding of a black hole allows for a greater understanding of the concept of space time and maybe gives us a grasp of both science fiction and science fact. Hopefully, all the clarification will come by the close of this essay. A black hole is probably one of the most misunderstood ideas among people outside of the astronomical and physical communities. Before an understanding of how it is formed can take place, a bit of an introduction to stars is necessary. This will shed light on the black hole philosophy.   Ã‚  Ã‚  Ã‚  Ã‚  A star is an enormous fire ball, fueled by a nuclear reaction at its core which produces massive amounts of heat and pressure. It is formed when two or more enormous gaseous clouds come together which forms the core, and as an aftereffect the conversation, due to that impact, of huge amounts of energy from the two clouds. The clouds come together with a great enough force, which a nuclear reaction ensues. This type of energy is created by fusion wherein the atoms are forced together to form a new one. In turn, heat in excess of millions of degrees Fahrenheit is produced. This activity goes on for eons until the point at which the nuclear fuel is exhausted. Here is where things get interesting. For the entire life of the stars, the nuclear reaction at its core produced an enormous outward force.

Globalization and Drug Trafficking

Cheniece Bray Professor Hooper ENGL 1133 P19 12 November 2012 Annotated Bibliography II Working Title: Globalization and Drug Trafficking| Topic Description: Nations worldwide have been facing and losing the war on drugs for some time now. Innocent citizens are affected with the negative side effects due to drug trafficking such as violence resulting in death, lack of government assistance to halt the issue, and increase of crime rates.In this paper I would like to discuss the actions that can be taken to help stop drug trafficking worldwide, starting with one of the main drug routes from Mexico to the United States and other areas globally. I believe the war on drugs can be defeated if it is attacked by the government on every level federal, state, and local. | Working Thesis: What can be imposed to stop the violence and high crime rate related to drug trafficking and also decrease the flow of drugs across borders? | Source #1| Stout, R. (2012).Do the United States and Mexico Really Want the Drug War To Succeed? Monthly Review: An Independent Socialist Magazine, 63(8), 34. | This article stands out to me because it addresses one of my many concerns for this topic and that would be what is the government doing in order to defeat this war on drugs? Why is it so easy for drugs to travel past borders where government militia is stationed? Stout presents an argument in this article discussing what militarized efforts are being enforced to stop Mexican cartels as it seems like there is not much being done.Prosecution of offenders is not enough because even behind bars somehow kingpins still find a way for drugs to be distributed across the border into the United States. Most drug cartels â€Å"financed the construction and operation of luxurious night clubs, gourmet restaurants, and gambling activities that attracted large numbers of U. S. residents† (Stout, 2012, p. 2) making it very easy for individuals to gain access to these illegal drugs. | Source #2| Ei ght Steps to Effectively Controlling Drug Abuse And the Drug Market Retrieved from http://www. csdp. rg/news/news/8steps. htm| This online article offers many alternatives beside persecution that could be used to effectively control drug abuse and the control the striving drug market. I will use this article to help me with ideas of what policies would be best enforced inside Mexico to regulate cartels. The government is not achieving much in the war on drugs by simply putting the offenders in jail because that is costing them a lump sum of money along with the problem still ongoing because the offender will eventually get out and continue to do the same things.This article describes how the money being used to put offenders in jail could instead but used to treat, prevent, and educate offenders as the law enforcement should understand that their job is not enough to stop these powerful cartels. Drug trafficking is a problem and should be treated as one instead of a burden that cont inues to get recycled. | Source #3| Gleason C. (2008). Financial Cost of the War on Drugs Retrieved from http://suite101. com/article/financial-cost-of-the-war-on-drugs-a53068 | In this article Gleason demonstrates how much money is being spent to try and stop the war on drugs.This article will be useful to me because it will help me get a understanding of how much money is spent to house an inmate in jail who has been constantly convicted of using and selling illegal drugs, also providing and paying police officers with drug units to help stop drug trafficking. Gleason's article was useful and corresponded well the topic I chose over drug trafficking, although this article is biased it helped me formulate an opinion after I observed how much money the government has dispersed and seemingly wasted trying to prevent the use and movement of drug trafficking .This will be used in my research paper to give an example of the cost in the government trying to solve this ongoing problem. | Source #4| Jenner, M. S. (2011). International Drug Trafficking: A Global Problem with a Domestic Solution. Indiana Journal Of Global Legal Studies, 18(2), 901-927. | In this article Jenner explains many ways in which drug trafficking can be controlled, one of the ways Jenner discusses is the universal legalization of drugs.I will use this in my research paper as a policy that can be put into place to help eventually stop drug trafficking. Legalization would attack the drug market in a very sensitive matter; if drugs are legal the head â€Å"kingpins† of nations delivering narcotics, cannabis, and other drugs are unable to receive a profit from the drug trade therefore defeating the purpose of the whole process which is money and control. If this policy would ever be considered, control would then again be in the hands of the government and out of the violent drug cartels worldwide. |

The Story of an Hour

The Story of an Hour: Discuss three examples AND kinds irony used in â€Å"The Story of an Hour. † Make sure to have one example of verbal irony, one of situational irony, and one of dramatic irony. One example of verbal irony in â€Å"A Story of an Hour† is the last sentence in the story which says â€Å"When the doctors came they said she had died of heart disease—of joy that kills† (DiYanni 41) This is verbal irony because it is written that she died of too much happiness to see her husband, whom she thought was dead, alive. However, it was because she was incredibly distressed to see him. One instance of situational irony in â€Å"The Story of an Hour† is when Mrs. Mallard learns of the death of her husband. At first, she reacts as any person would at the news of losing someone close to them by crying and isolating herself. However her real feelings about her husband’s death are shown later when she thought to herself, â€Å"There would be no one to live for during those coming years; she would live for herself† (40) However this feeling of freedom did not last long. Towards the end of the story her husband appears at the door unharmed. She then realized that she was not free from her unhappy marriage at all. Dramatic irony is also used in â€Å"The Story of an Hour† through Mrs. Mallard's realization that she is free from her husband and with her death. While Mrs. Mallard was alone in her room she realized that she would no longer be bound to her husband but rather free to do whatever she should choose. However, no one else in the story knew this; they all believed that she was very sad and depressed. Josephine, a woman in the house, even thought Mrs. Mallard was making herself sick. She said, â€Å"I beg; open the door—you will make yourself ill† (40) However, Mrs. Mallard was doing quite the opposite by â€Å"drinking in a very elixir of life through that open window† (40). The Story of an Hour The possibilities of freedom for women were unlikely for women living in the late nineteenth century. Women were confined and overpowered by men. Kate Chopin, a women of the late nineteenth century herself, was a writer living within such a society. In â€Å"The Story of an Hour† (1894), Kate Chopin uses elements of settings–windows and door–in order to highlight the possibilities of freedom and the threat of confinement for women in late nineteenth century American society. Chopin uses figurative language of symbols and imagery to conflate the possibility of freedom with the physical setting outside the window. Chopin uses the â€Å"open† window as a symbol to suggest freedom: She juxtaposes the comfortable, roomy armchair with the window to demonstrate Mrs. Mallard's feelings of freedom and comfortability within her own home now that her husband is dead. Mrs. Mallard looks out of her window into the endless opportunities she is now able to dream of:†There stood, facing the open window, a comfortable, roomy armchair†(Chopin  147). She uses the â€Å"tops of the trees† as symbolic imagery to describe how Mrs. Mallard is now feeling free. The spatial relation between Mrs. Mallard and the trees outside is used to suggest that freedom has become more tangible than before: â€Å"She could see in the open square before her house the tops of trees that were all aquiver with the new spring life† (Chopin 147). Chopin uses taste imagery to suggest that Mrs. Mallard has become more aware of her own senses and perception of freedom:†The delicious breath of rain was in the air†(147). Chopin conflates the patches of blue sky–a symbol of hope–to emphasize the unbounded prospects Mrs. Mallard now has facing her. Color imagery is used to suggest positive emotion: â€Å"There were patches of blue sky showing here and there through the clouds that had met and piled one above the other in the west facing her window† (Chopin 148). Chopin uses onomatopoeia–twittering sparrows–to evoke new life. The spatial relation between Mrs. Mallard and the eaves suggests she is closer to freedom and the outside world. â€Å"Countless sparrows were twittering in the eaves† (Chopin 148). The conflation of symbols and imagery with the possibility of freedom suggests Mrs. Mallard is beginning to feel independent as a women in the late nineteenth century. The possibilities of freedom are becoming more of a reality for Mrs. Mallard. Chopin conflates the spatial relation between Mrs. Mallard and the outside world with sensory imagery to make the possibilities of freedom concrete. Chopin conflates the spatial imagery –â€Å"something coming at her†Ã¢â‚¬â€œ between Mrs. Mallard and the  unknown to suggest that freedom is something new to her: â€Å"There was something coming to her and she was waiting for it, fearfully†(148). Chopin uses animal imagery–â€Å"creeping†Ã¢â‚¬â€œ to suggest that freedom, once distant, has now become concrete and close. Sense imagery is used to portray new life: â€Å"She felt it, creeping out of the sky, reaching toward her through the sounds, the scents, the color that filled the air† (Chopin 148). Chopin uses the color of Mrs. Mallards white hands as imagery to conflate and compare with heaven; the unknown. â€Å"She was striving to beat it back with her will–as powerless as her two white slender hands would have been†(148). The reality that Mrs. Mallard is beginning to feel freedom is something she would have never of dreamed for herself as a women living in her time. Chopin begins to manipulate the temporal setting by conflating the past and the present. Chopin is able to manipulate the temporal setting, symbolically, by foreshadowing the future. She conflates the present, new life and freedom, with the future, death: â€Å"She knew that she would weep again when she saw the, kind tender hands folded in death; the face that had never looked save with love upon her, fixed and gray and dead†(Chopin 148). Again, Chopin manipulates the temporal setting by conflating the present, a bitter moment, with Mrs. Mallard’s future freedom: â€Å"But she saw beyond that bitter moment a long procession of years to come that would belong to her absolutely†(148). Chopin juxtaposes the â€Å"open window† with magical medicine, an â€Å"elixir† to portray the remedial feeling of freedom Mrs. Mallard is  experiencing:†She was drinking in a very elixir of life through that open window† (Chopin 149). Chopin manipulates the temporal setting of the present to suggest a positive future for Mrs. Mallard: â€Å"Spring days, and summer days, and all sorts of days that would be her own† (Chopin 149). Chopin conflates Mrs. Mallard’s past feelings of infinite confinement, with her present feelings of everlasting freedom suggesting there may be a long lived future for Mrs. Mallard. â€Å"She breathed a quick prayer that life might be long. It was only yesterday she had thought with a shudder that life might be long†(148). The manipulation of time allows Chopin to takes us into the future where endless possibilities await. Chopin conflates the physical setting–doors–with the possibility of freedom and confinement. Chopin uses the locked door as a metaphor to show that Mrs. Mallard is now in control, something that hasn’t happened before: â€Å"Josephine was kneeling before the closed door with her lips to the key-hold; imploring admission†(149). Chopin juxtaposes the idea that Mrs. Mallard was confined and ill before she was in control of her own confinement with the idea she is getting better at last with newfound freedom: â€Å"Louise, open the door! I beg; open the door–you will make yourself ill†(149). Chopin conflates Mrs. Mallard standing up with the action of opening her own door to demonstrate how the possibility of freedom has given her a newfound confidence: â€Å"She arose at length and opened the door to her sister’s importunities†(149). As the door is opened by a man, Chopin uses the  latchkey as a symbol of confinement to suggest that there is still an inequality between men and women:â€Å"Some one was opening the front door with a latchkey. It was Brently Mallard who had entered†(149). Chopin has brought the reality of confinement and inequality back to life as Mrs. Mallard dies as a women in the late nineteenth century locked in her house. In â€Å"The Story of an Hour† (1894), Kate Chopin uses elements of settings–windows and door–in order to highlight the possibilities of freedom and the threat of confinement for women in late nineteenth century American society. The possibilities of freedom for women were unlikely for women living in the late nineteenth century as women were confined and overpowered by men. The Story of an Hour The Story of an Hour: Discuss three examples AND kinds irony used in â€Å"The Story of an Hour. † Make sure to have one example of verbal irony, one of situational irony, and one of dramatic irony. One example of verbal irony in â€Å"A Story of an Hour† is the last sentence in the story which says â€Å"When the doctors came they said she had died of heart disease—of joy that kills† (DiYanni 41) This is verbal irony because it is written that she died of too much happiness to see her husband, whom she thought was dead, alive. However, it was because she was incredibly distressed to see him. One instance of situational irony in â€Å"The Story of an Hour† is when Mrs. Mallard learns of the death of her husband. At first, she reacts as any person would at the news of losing someone close to them by crying and isolating herself. However her real feelings about her husband’s death are shown later when she thought to herself, â€Å"There would be no one to live for during those coming years; she would live for herself† (40) However this feeling of freedom did not last long. Towards the end of the story her husband appears at the door unharmed. She then realized that she was not free from her unhappy marriage at all. Dramatic irony is also used in â€Å"The Story of an Hour† through Mrs. Mallard's realization that she is free from her husband and with her death. While Mrs. Mallard was alone in her room she realized that she would no longer be bound to her husband but rather free to do whatever she should choose. However, no one else in the story knew this; they all believed that she was very sad and depressed. Josephine, a woman in the house, even thought Mrs. Mallard was making herself sick. She said, â€Å"I beg; open the door—you will make yourself ill† (40) However, Mrs. Mallard was doing quite the opposite by â€Å"drinking in a very elixir of life through that open window† (40).

E-Manufacturing: A Technology Review

Proceedings of the World Congress on Engineering 2008 Vol II WCE 2008, July 2 – 4, 2008, London, U. K. E Manufacturing a Technology Review Dr. H. K. Shivanand, Nanjundaradhya N. V, Prabhakar Kammar, Divya shree S, Keshavamurthy YC. Abstract: With a rapid change in technology especially in the manufacturing sector, customers are demanding more value, less risk, and better integration of products, hence there is a need to change the manufacturing strategies, which can result in improved performance thereby meeting the customer demands. This paper critically reviews a new area to overcome the above problem called â€Å"E – Manufacturing† which can integrate customers, products and suppliers with the help of Internet Technology. The concept of E – Manufacturing, its development, tools and potential benefits are discussed along with application examples on Automobiles. Areas like E – Maintenance, E – Diagnostics, E – Business related to E – Manufacturing is also discussed. By adopting such a manufacturing technique zero downtime, reduced product error, customer satisfaction, quick manufacturing changes can be accomplished. In addition the concept of E-Manufacturing applied to the manufacture of gears is also discussed there by providing better understanding of this process. like ERP, MES, SCADA, and even newer acronyms like Enterprise Asset Management (EAM) and Product Lifecycle Management (PLM) are communicating with each other, and sharing data through internet connections. II. EVOLUTION OF E MANUFACTURING For decades, the dominant manufacturing model was based on principles of mass production [2]. Standardized parts and processes made economies of scale achievable, but limited design flexibility and customization. The outsourcing and lean manufacturing movements of the 1980s and 1990s drove the emergence of a new paradigm, termed the Quality Management era. Manufacturing companies, particularly large Original Equipment Manufacturers’ (OEM) outsourcing shifts critical elements of the design and production process onto a manufacturer’s supply chain. The lean manufacturing movement places a premium on time and inventory reduction. Combining the attributes of the Quality era suggests a very different business model for manufacturing – enterprise integration or E-Manufacturing. In the E-Manufacturing era, companies will be able to exchange information of all types with their suppliers at the speed of light. III. E MANUFACTURING E-Manufacturing can be most cogently and generally described as the application of the Internet to Manufacturing [3], further E-Manufacturing is becoming popular with the increased use of the internet. Due the widespread availability of the Internet; large-scale distributed projects in manufacturing are becoming popular. It is the methodology and framework for collaborative Virtual Manufacturing. The ability to exchange information and automate manufacturing processes forms the building blocks of the virtual manufacturing companies of the near future. It covers all aspects of manufacturing – sales, marketing, customer service, new product development, procurement, supplier relationships and logistics manufacturing strategy development and so on. As a result, it is now so much easier to allow certain people gain access to certain sections of the system, according to whatever criteria they like; maintenance people need certain parts of the data, but not others; operators would be able to access a limited number of devices; managers would be allowed to monitor, but not change anything, etc. New technologies such as the Extensible Markup Language (XML) are now making it easier to share data between different application programs, and to set up computers to take actions based on criteria †¹ for instance, to order supplies when inventories reach a critical low point. The E-Manufacturing WCE 2008 Index Terms— E – Manufacturing, E – Maintenance, E – Diagnostics, Automobile, Gears. I. INTRODUCTION F manufacturing companies what matters more is that how efficiently their company can compete globally with others as an organization followed by meeting the day to day requirements of the customer and exchange of hassle free information while not focusing only on sales of the company [1]. Today’s customers provide top priority for money, better quality and less risk. In order to cater to the needs of the customer, manufacturing companies have adopted a new technique called E Manufacturing. It is concerned with the use of the Internet and E-Business technologies in manufacturing industries wherein a network can be established between the customer, the manufacturer and the product. The internet offers a frictionless path for exchange of information. The concepts of E-Maintenance, E-Business, E Diagnostics and ECare have led to the formation of an E-Factory which can produce quality products at remarkable speeds. In short, the customer is just a click away from a business deal. Within manufacturing concerns, the various enterprise-wide systems OR today’s Manuscript received October 11, 2007. H. K. Shivanand is with the University Visvesvaraya College of Engineering , Bangalore, Karnataka, INDIA 560001 phone: 918022961887 e-mail: Shivanand. [email  protected] gmail. com Prabhakar Kammar, is working at MVJ College of Engineering, Bangalore Nanjundaradhya N. V is working at RV College of Engineering, Bangalore Divya shree S is working at BEL, Bangalore. Keshavamurthy YC, ME (Manufacturing Sc &Engg), UVCE, Bangalore. ISBN:978-988-17012-3-7 Proceedings of the World Congress on Engineering 2008 Vol II WCE 2008, July 2 – 4, 2008, London, U. K. technique also affects products as well since it is possible to use Internet technologies to add new product functions and to provide new services. The Internet is being used even at the shop floor level. For instance, computer numerical control devices (CNC’s) can be connected via intranets or the Internet to ERP (Enterprise Resource Planning), production planning, or maintenance systems. As such, the E-Manufacturing project aims to develop an appropriate framework for a common platform to enable distributed planning and control in manufacturing for quicker, easier, secure and cost-effective collaborations. The developed system will allow dispersed engineering team members to work together productively, as if they were under one roof. This transformation of the enterprise coincides with the increasing content of information contained in products and processes. This new production enterprise is information-rich. The major functions and objectives of e-manufacturing are: (a) provide a transparent, seamless and automated information exchange process to enable an only handle information once (OHIO) environment; (b) improve the utilization of plant floor assets using a holistic approach combining the tools of predictive maintenance techniques; (c) links entire SCM operation and asset optimization; and (d) deliver customer services utilizing the latest predictive intelligence methods and Tether-free technologies [4] Fig 2: Before Implementing E Manufacturing Fig 3: After Implementing E Manufacturing IV. E MANUFACTURING TOOLS Implementation of the E-Manufacturing tools results in cost saving, regardless of the company size. E-Manufacturing tools enable connectivity among the various modules of the manufacturing process. Areas where the E-Manufacturing tools need to be developed are listed below [5 – 9]. Data and information transformation tool: The large amounts of raw data collected during a manufacturing process are rendered useless, unless the data is gathered and transformed into some useful information which may be used to monitor a system. To understand this better a simple example is taken below. Consider a CNC machine hooked to the Internet as shown in Figure 4. It shows the way data and information are transformed from the machine to the internet. Here the idea is to monitor the health of the tool [life of the tool] fixed in the CNC machine. This technique can also be used to calibrate a machine from the Internet. Fig 1 Evolution of E Manufacturing (Source NACFAM) The contrast between the traditional system and the system with E-Manufacturing is indicated below [3] ISBN:978-988-17012-3-7 WCE 2008 Proceedings of the World Congress on Engineering 2008 Vol II WCE 2008, July 2 – 4, 2008, London, U. K. Fig 4: Tool Monitoring in a CNC Machine Using Internet. Prediction Tools: Apart from data being gathered, certain tools need to be developed, which can predict or detect the degradation of various parts of the machine, performance loss and trend of failure. Developing a tool which monitors these aspects could set the trend for an advanced diagnostic system. Optimization Tools: As far as E-Manufacturing is concerned data can be accessed from any part of the globe at any time. Hence certain tools need to be developed which can optimize the data and provide easy to read results. For example, these tools should be able to provide the performance of a drill bit for various drilling operation verses time, temperature, tool tip failure with various materials etc. Synchronization Tools: This is an important tool in the E-Manufacturing environment, which can associate various groups such as customer’s suppliers and manufacturers, where first hand information needs to be sent to these groups during emergencies, for example – if tool needs a replacement or tool has worn out then the information is sent from first the manufacturer to the supplier and tool maker where the tool can be assessed for performance. The new connectivity and communications tools will boost productivity, profits, speed to market, and flexibility for those manufactures who are willing to upgrade. Some of the common E-manufacturing tools are SMS, E Mail, Bluetooth, Wi-Fi, Fax and Infrared Connectivity. V. E MAINTENANCE Progressive plant executives, maintenance managers, and work planners have always wanted to have information about the condition of equipment assets at their fingertips when they need it. Unfortunately, it typically is scattered among separate information systems. It is difficult to view, compile and synchronize the different information types on the same computer terminal. If one wants to maximize business continuity by increasing device up-time and minimize the time, costs and headaches associated with device administration he must adopt the E-Maintenance strategy. It is a network that integrates and synchronizes the various maintenance and reliability applications to gather and deliver asset information where it is needed, when it is needed. Interconnectivity of the islands of maintenance and reliability information is embodied in E-Maintenance. The EMaintenance network can be developed from a collection of information islands by using a single proprietary system, a custom bridge, or by using an open systems bridge. EMaintenance also removes the need for manual meter readings that is your device administration is virtually reduced to nil. It is estimated that 15- 40% of indirect costs of manufacturing is maintenance related. About 50% are unnecessary corrective maintenance, which costs 10-15 times more than predictive maintenance. Furthermore, 25% of maintenance is preventive, which is 3-5 times more expensive then predictive. An effective E-Manufacturing strategy uses predictive maintenance techniques to forecast equipment wear and predict failure. Apart from this, it also alerts MRO managers to unexpected problems. This allows managers to proactively correct problems, thus maximizing the use of machinery and personnel while minimizing preventive maintenance expenses. Predicting the reliability of plant-floor equipment can be the difference between a few minutes of preventive maintenance and hours or days of downtime for corrective maintenance. Ultimately, predictive maintenance, computerized maintenance management systems or CMMS, and effective utilization of maintenance specialists make E Manufacturing work. VI. E DIAGNOSTICS E-Diagnostics is the reactive and proactive remote diagnosis, maintenance and repair of equipment by service personnel. EDiagnostics offers many businesses the promise of better equipment reliability and performance at a much lower cost. It is the hardened, reliable acquisition of time-stamped, highspeed information from the tool registers and ancillary data points, database retention and management, parsing and analysis. A complete E-Diagnostics solution would include the following: (a) Remote capture, transmission, analysis and dissemination of equipment performance data. (b) Remote takeover of equipment to manipulate equipment settings during and after repair. (c) A trigger for replenishing spare parts. (d) Faster and more effective response to field service engineering requests, bringing the experts remotely to the problem. (e) Reduced equipment and process variation, through better visibility and response to differences in equipment performance among machines. ISBN:978-988-17012-3-7 WCE 2008 Proceedings of the World Congress on Engineering 2008 Vol II WCE 2008, July 2 – 4, 2008, London, U. K. (f) Preventive response to pending equipment failures through the use of advanced process control (real-time multivariate statistical analysis). (g) Enhanced next-generation tool development through improved awareness of deficiencies in current equipment designs. Traditional E-Diagnostics systems monitor tool performance and provide â€Å"maintenance needed† alerts to service and engineering personnel. Much more can be derived from the rich sensor data generated as wafers pass through process chambers. This step in E-Diagnostics is to employ proven enterprise data mining (EDM) techniques to correlate device yield and performance with the vast amount of tool-level and wafer-level chamber sensor data. With this new approach, yield and process-level issues can be uncovered down to a particular sensor reading on a specific tool process chamber. Once a specific tool issue can be identified to have an impact on process results, specific E-Diagnostics monitors can be targeted to prevent future yield and process excursions, completing a closed loop process learning effort. The steps to be followed to implement the E Diagnostics strategy in an industry are as shown below. maintenance programme. Computerized maintenance management systems optimize the deployment of all maintenance, repair, and operating (MRO) resources, such as people, spare parts, tools and facilities, and allow the creation of a planned maintenance programme for all assets. EProcurement allows the replacement of stock with information and offers direct access to spares at lowest cost. For the successful application of E-Manufacturing there must exist a partnership between the supplier and the customer. The goal is to deploy best practices in e-business processes as quickly and effectively as possible while ensuring a quantifiable return on investment (ROI). The benefits of adopting E business strategy are; (a) Quick installation of software updates with no need for expensive integration projects. (b) One enterprise wide view of the customer, product or process. (c) Global deployment from one instance of the software, making all applications accessible globally via a standard Web browser. (d) Simplified systems and maintenance for IT staff due to the one-vendor approach. e) Streamlined business processes. (f) Better decision-making and business intelligence because of the single-database architecture and preintegrated applications and rapid deployment at lower cost. VIII. AUTOMOBILE INDUSTRY AND GEARS Every automobile industry has an umpteen number of divisions, each division manufacturing a particular system of the automobile- like the steering system, brake system, engine, suspens ion, chassis and body, interiors, safety division, quality control division, etc. With so many departments working towards the creation of the same end product, a lot of time and money is spent in redesigning and related cases which may arise due to inefficient data transfer or delayed transfer of important information between the departments. Such a problem can be sorted out by implementing the EManufacturing strategy into the industry. The internet can be used to share data and information between various departments and between manufacturers worldwide. Data sharing can be extensively used between the head office and the various branches and service centers of a company which may be located at different locations around the globe. For example, if a component is found defective in one of the branches the information is relayed immediately to the other branches warning them to arrest the production of that component immediately. As a result of this, huge amounts of time, material and money are saved. The internet is a means of communication between production engineers, the manufacturing engineers, and the design engineers. Adopting this new technique can reduce the complexity of the part, without jeopardizing performance. Using CAE tools in the design process may have a profound impact on savings. In many cases, the virtual prototype is a much more accurate representation of what we designed than the physical Fig 5: E Diagnostics VII. E BUSINESS In today’s world it’s the â€Å"Time Factor† that can make or break an industry. Gone are the days of buying different applications from a host of technology vendors and spending countless months and dollars integrating them. Increasingly, the customers are demanding more customized products, faster delivery schedules, and instant access to order status. Results have to be assessed in financial terms, with return on net assets or return on capital employed, the key measure. EBusiness promises a solution to this customer demanding market. Automated scheduling provides a better method of managing production orders and increases the visibility of current and future scheduling activities. Tracking involves the collection, analysis, viewing and reporting of production data. To get the best productivity from the assets deployed, three main areas need to be addressed: Condition based maintenance; computerized maintenance management; EProcurement. Condition-based maintenance predicts the deterioration of assets that allows the planning of maintenance actions more effectively and monitors the effectiveness of the ISBN:978-988-17012-3-7 WCE 2008 Proceedings of the World Congress on Engineering 2008 Vol II WCE 2008, July 2 – 4, 2008, London, U. K. prototype. Apart from adopting this strategy in the production line it can also be used in the maintenance program of an automobile. For example, if you only repair your car when it breaks down, you face costly corrective maintenance. A preventive maintenance schedule, based on the manufacturer's recommendations, may prevent breakdowns. Preventive maintenance is possible using E-Diagnostics. When a car is taken in for servicing, it is hooked onto the diagnostic computer which indicates existing problems. Moreover the service centers are constantly hooked up to the internet and are updated on availability of spares, latest trends in servicing and solutions to commonly occurring problems. All this information is made available from their counterparts from around the world. To add to this the entire service history of the vehicle is uploaded to the net so that it is made available to all of the company’s service centers around the globe which will help identify the status of the vehicle wherever and whenever one wants to service it. Gears form an important component in most machines as well as in automobiles. Today’s Customers demand a multitude of gears in a short span of time, without any compromise on quality. The solution to this challenge is E Manufacturing. One can hook up the gear manufacturing machine to the net. It offers fully integrated production control software for estimating, order and job control, job travelers, scheduling, data collection, inventory control, purchasing, work center loading and cost accounting. Various design parameters can be entered by the customer and modifications may also be made until the last minute. Once the system is in place economic and efficient manufacture of gears is imminent. 1. Synchronize Production Processes with Business Processes. . Orchestrate Upstream Flows of Work, Information, and Material. 3. Automate Business Processes & Workflows within the Enterprise 4. Give Control to Managers with Plant Information & Analysis Tools. 5. Integrate the Design Process among All Collaborating Parties. 6. Leverage Bi-directional Down-stream Information. 7. Enable Collaborative Maintenance and Manufacturing Support. X. CONCLUSION This paper discussed cer tain key areas and subsets of the E-Manufacturing strategy which when implemented will yield priceless benefits to an industry that implements it. Further the concept of an E-Factory promises greater increase in productivity and performance, while at the same time decreases production costs. However, for E-Manufacturing to be a success, co-operation between various public and private sector organizations is mandatory. This new thinking paradigm to integrate web-enabled and predictive intelligence for manufacturing systems is becoming a new benchmark strategy for manufacturing companies to compete in the twenty-first century. REFERENCES [1] [2] White paper â€Å"Making sense of E-Manufacturing: A Road map for manufacturers Industry† Rockwell Automation. Exploiting E Manufacturing: Interoperability of Software Systems used by US Manufacturing â€Å" National Coalition for Advanced Manufacturing, 2001, pp 1-13 Manufacturing Engineering Handbook – by Hwaiyu Geng, McGraw Hill Professional 1 edition, March 1, 2004, Koc M, Ni J, Lee J. Introduction of e-manufacturing. Proceeding of the International Conference on Frontiers on Design and Manufacturing, Dalian, China, July 2002. E – Manufacturing Review – Jay Lee – Robotics and Computer Integrated Manufacturing Journal. , May 23 – 2003 Lee J, Ahad A, [email  protected] M. E-manufacturing—its elements and impact. Proceedings of the Annual Institute of Industrial Engineering (IIE) Conference, Advances in Production Session, Dallas, TX, USA, May 21–23, 2001. Lee J, Ni J. Web-enabled e-manufacturing. Proceeding of Sixth International Manufacturing Technology in Hong Kong, December 2001 Lee J, Ni J. E-manufacturing and e-business integration: a case study. Proceeding of the International Manufacturing Leaders Forum (IMLF), Adelaide, Australia, February 8–10, 2002. Lee J, Ni J. Infotronics agent for tether-free prognostics. Proceeding of the AAAI Spring Symposium on Information Refinement and Revision for Decision Making: Modeling for Diagnostics, Prognostics, and Prediction, Stanford University, Palo Alto, CA, March 25–27, 2002. [3] [4] [5] [6] [7] Figure 6 Application of E Manufacturing to Automobile Industry [8] [9] IX. BENEFITS OF E-MANUFACTURING E-Manufacturing is a fundamental change in the strategic value proposition for manufacturers. Its collection of systems, processes, and technologies that support and enable manufacturers to compete in collaboration with others has seven fundamental jobs: ISBN:978-988-17012-3-7 WCE 2008

Growing in Intimacy with God Essay

Introduction The beginning of our relationship with God is from the moment we accept and believe Jesus Christ as our Lord and savior. As it gets personal, it grows daily until it becomes deeper and intimate. Intimacy generally refers to the feeling of being in a close personal association and belonging together. It is a familiar and very close affective connection with another as a result of a bond that is formed through knowledge and experience of the other. In this lesson, we will learn and understand the work of God in our lives for us to be intimate with Him, yet it doesn’t require full force of effort from us. The following insights will help us to set ourselves to submit in the Lordship of God until we reach personal intimate relationship with Him. How would you complete the following statement? The most essential ingredient to living the Christian life is to†¦ †¢Fill your heart and mind with Scripture †¢ Pray as much as you are able. †¢Attend Christian meetings for inspiration. †¢Get involved in ministry. †¢Choose to do what is right and Godly. †¢None of the above. Each of the above choices are important to living the Christian life, but none of them qualifies as the â€Å"most essential† because they all fail to adequately deal with the primary obstacle Christian must overcome. This obstacle not only makes the Christian life difficult to live, but impossible to live. Why we can’t live the Christian Life? The primary obstacle that hinders Christians is the Sin Nature. Contrary to the belief that we are all born innocent, Scripture teaches that we do not become sinners, but that we are already born sinners. Psalms 51:5 The following Scriptures describes this problem Romans 3:10-12 Mark 7:21-23 Romans 8:7-8 Because of our sinful nature, not matter how many Scriptures we know, not matter often we pray, no matter how many inspirational meeting we attend, no matter how involved we are in ministry, or no matter how strong will to do right, our best efforts will fail because we do not deal with the main problem. When done in our own strength, these activities simply produce Spiritual pride! But God has provided a solution for us. God’s Solution God’s Solution to our Sin nature is to give us a New Nature! He did this by putting His Holy Spirit in us at the moment we received Jesus Christ! The following Scriptures describe this miracle. John 3:5-7 Ephesians 4:23-24 God’s spirit imparts God’s nature and power in us! Ezekiel 36:26-27 Acts 1:8 Philippians 2:13 (TLB) God’s Spirit gives us the Desire (Ezekiel 36:26-27) and the Power (Acts 1:8) to do His will! God’s Spirit in Us The desire in you to please God is the work of the Holy Spirit in your heart. It is evident of the New Nature you inherited when you were born again by God’s Spirit. We are born into this world with a Sin Nature. But the moment we trust Jesus Christ for forgiveness, we are â€Å"born again† with a new nature, which is not only the new me but the real me! The sin nature, or Old me, can never please God and does not even want to, but our New Nature not only desires to please God, but it is able to by the Power of the Holy Spirit. Notice that the Christian’s Sin Nature will cease at the moment death, while our new nature will continue for eternity! The challenge we face in this life is the battle between these two natures to rule in our minds, our hearts and bodies. They are at war within us! The good news is that this struggle is temporary. Once we are free of Sin Nature, our new nature will be unhindered to do all that God desires. It is important to understand that the key to victory is God’s Spirit within us. Only by allowing His Spirit to live through us will we experience God’s Will and Power in us! Be Filled with the Spirit Ephesians 5:18 teaches us how to apply God’s provision to overcome sin. The word â€Å"filled† means to be filled to the full! A person â€Å"filled with the spirit â€Å"leaves no room for the Sin Nature to control his life. Command: This verb teaches that we are â€Å"filled with the Spirit† by an act of our will! God is not asking us to be filled with his Spirit if we feel like it. God is commanding us to be filled. No matter how we feel †¦ no matter what our circumstances, we can choose to be filled and allow God to rule in our lives! God’s Work: This verb also indicates that it is God who fills us. We simply make ourselves available to Him! As we yield our lives to God, His Spirit empowers us with His Desire and Ability! Present Tense: Finally, this verb commands us to continually allow God’s Holy Spirit to fill us ~ moment by moment, hour by hour, day by day. No breaks and no allowance for the Sin Nature to reign! How can we be sure God will fill us with His Holy Spirit? Because He said He would, and God does not lie! 1 John 5:14-15 1. Is it God’s will for us to be filled with His Spirit? ⠝  yes ⠝  no 2. If we ask God to fill us with His Spirit, will He hear us? ⠝  yes ⠝  no 3. If we know God will hear us, can we be sure we are filled? ⠝  yes ⠝  no Application The following steps can help us experience God’s Power continually 1. Confess ~ Not being filled to the full with God’s Spirit is sin. Confess this to God and claim His forgiveness (1 John 1:9) 2. Be Filled with the Holy Spirit ~ Ask God to fill you with His Spirit! Filling of the Holy Spirit doesn’t end our relationship with God. Rather, it only set our condition with the Lord. Each of us can posses a spiritual relationship with Christ. Jesus is very well aware of our individuality and want to give us just what we want to grow in our walk with Him. The following presents a guide that may help you find time to spend with God.

Qualitative Research Proposal Essay

For my field research observation site I chose the flea market (la pulga) located in Alamo, Texas. I chose this specific site because in our Mexican American culture families tend to go there to buy cheap merchandise. Although many people go there many of the things they buy there can or is related to crime. I chose this flea market because it is close to home and there are usually a high number of people there during the weekends. There were a number of issues with this place, but there were two who stood out above the rest. The main points were: do people realize that by buying certain objects they are committing a crime, and also is law enforcement doing anything to prevent these types of crimes from happening. There are mainly two types of individuals who go to these places. The first types of people who go to these places are mainly Mexican American. There is not one age group that stands out above the rest since Mexican American groups. Mexican American individuals tend to visit these places as a family. The second types of people are mainly Winter Texans. A rough estimate from my observation would be that Winter Texas are 30% middle aged (45-60), and 70% elderly. Winter Texans mainly go as couples and are usually there just pass time; Mexican Americans on the other hand are there because they want to buy cheap objects. Research Question or Topic My research questions are: 1. Are people well informed that purchasing pirated DVDs is a crime? 2. What is law enforcement doing to prevent these crimes from happening? Literature Review Bibliography One of the academic journals I found out to be possibly the most interesting out of my whole research was the one dealing with the piracy of CDs/DVDs. This journal does not only talk about the piracy of media, but also about the replicator, the user, and the technology used. It explains how the replicator uses computer software to copy the media and how it gets to the market from there. It talks about the types of users who buy the product and it also talks about the technology being enforced to make it harder and in some cases impossible for the replicator to create a copy of the media. Even though this journal is out there it still seems that some people are unaware of the consequences with the replication of this media, and also the problem it can cause in our society. One of the main points the article describes is whether copy-protection work or not. The answer to this question is that there is copy protection on DVDs which makes it harder for anyone to copy media, but since pirates (replicators) don’t play by the rules there are still some ways to bypass the copy-protection. Research done in this journal- 1. Copyright 2. Product Counterfeiting 3. Manufacturing Processes 4. Anti-counterfeiting Measures 5. Replicators 6. Users of the Pirated DVDs The second article I found is called Factor that Influence the Piracy of DVD/VCD Motion Pictures. Basically the title says what the article is about. It explain some of the major factors that cause people to burn these DVDs, and factors that cause people to buy them. The article says that people tend to buy these DVDs because of the cost benefit. This means that people are getting DVDs way cheaper than if you were to go and buy the real one at an actual store. The author’s findings are also used to support the social norms used to make an effort to stop the piracy of this media. Research done in this article- 1. Copyright Infringement 2. Pirated Video Recordings 3. Piracy 4. Empirical Research 5. Motion Picture Industry 6. Bootlegging and Methodology aspects. The last article I read was talking about the structure about an American flea market. There are differences between flea markets up North and flea markets here in the valley. One of the most obvious differences would be the people that go to the flea markets. The article talks about the types of people that go to the flea market. It talks about the economic effect a flea market has on society. It talks about the behaviors of the buyers and sellers in a flea market. The research in this article was done by surveys across different flea markets and on the consumers in those flea markets. Not only were these studies done on U. S. flea markets they were also done on different countries for example Mexico. Research done in this article – 1. Flea Markets 2. Marketing 3. Case Studies 4. Economic Activity 5. Consumer Behavior 6. Business Cycle 7. Sociocultural Factors My Three Sources Block, D. (1997), CD? DVD/piracy:the replicator, the user, and the technology. Emedia Professional, 10, 92. Chih-Chein, W. (2005). Factors that Influence the Piracy of DVD/VCD Motion Pictures. Journal Of American Academy Of Business, Cambridge, 6(1), 231-237. Sherry Jr. , J. F. (1990). A Sociocultural Analysis of a Midwestern American Flea Market. Journal Of Consumer Research, 17(1), 13-30 Research Design Step 1 Prepare myself by doing some background research on the site I am preparing to observe. Be prepared for anything that may come my way, and be prepared for opportunities that may arise while doing my research. I need to go organized and possibly focus on one point of interest. Need to prepare my looking and listing skills since they are essential for any field researcher. Go prepare to do constant writing since it is one of the most useful way of recording data. Step 2. Gain access to enter the observation site, in my case I don’t think it is a problem since it is open to the public. Other sites have different important sections but in a flea market everything is together so I just have to worry about getting inside. I need to get involved in normal activities to make myself unnoticeable and look like an everyday customer. Perhaps buy merchandise or other things regular customers do. Step 3 By looking as a customer I can build trust with the people working in this area, and this way they can go on doing their job like they normally do, and this can help me observe them in their normal working routine. Step 4 While walking around the site I can record anything I find to be deviant or criminal, in my case I found the distribution of illegal DVD copies. I’ll observe from afar, learn and record anything else. I have to make my findings very detailed this way I don’t miss anything of importance that can later help me answer my question, and this way I won’t have to return for small doubts I may have. Record any conversations I may have had with any of the people there. Step 5. Finally after I am done gathering data I just exit the observation site I just exit the site and start compiling my data. Step 6 After putting my data and getting a better understanding of my observation site. With a better understanding of what happens in the site I will be able to put together a detailed survey or interview questions. Of course the survey or interview will be anonymous and have to make sure the customer knows this. You need to make the customer know that the research is anonymous because if not the person might put false data and the data will be inaccurate. Step 7 After conducting all my research I can put together a conclusion and determine what it means. I’ll ask myself questions for example did I find the answer my questions, was my hypothesis correct, and is there more research to be done. The conclusion has to be precise this way if a person is interested in the same topic they will have all the information they need. Step 8 This is how will conduct my research and hopefully get a good grade on this assignment, if not I will need some research on how I can do better.

Disaster rescue plan Research Paper Example | Topics and Well Written Essays - 1750 words

Disaster rescue plan - Research Paper Example Disaster rescue plan When more than one approach, strategy or disciple is adopted in handling a particular disaster incidence, we say a multi-disciplinary response has been adopted. According the Karimganj District Resource Inventory (2011), a â€Å"disaster is a sudden, calamitous event bringing great damage, loss, and destruction and devastation to life and property.† Indeed for a large, cargo plane to be on fire prior to its scheduled flight is less than a disaster, which like all other forms of disasters, need rapid and urgent management solutions. As the emergency manager my very first approach towards handling such an aircraft disaster would be to contact all needed resource personnel and agencies whose duties are related to disaster management and control. Even before thinking of who and who would be part of the people to be contacted, I would first have in mind the need to make the agencies and personnel multi-disciplinary. In other words, I would form a multi-disciplinary committee. The n eed for constituting a multi-disciplinary committee lies in the following reasons: firstly, this would provide me the opportunity to tap and enjoy the different expertise and specialization of all the different agencies and personnel who will be contacted. This is because aircraft disasters are caused by a couple of factors, which demand the expertise and knowledge of as many intellectuals as possible. Constituting and multi-disciplinary committee would there put the identification of causes a step further, where by a more holistic approach would be taken by the different agencies. Secondly, a multi-disciplinary response has a greater probability of ensuring efficiency and speedy delivery of mandated task. This advantage is very important because aircraft disasters involve several precious lives and the public would certainly be itchy for information. For this reason, employing the responsibility of finding causes and scrutiny of extent of damage as well as the general management of the disaster into the hands of just a few people or agencies would make the public sit on thorns for long. Finally, a multi-disciplinary response would ensure credibility of findings and management task. This is so to speak because the collective conclusion drawn by many different experts from different backgrounds and with different duties about a single accident is more reliable than a single conclusion drawn by only one agency. Indeed it is for the reason of such advantages of multi-disciplinary response listed above that â€Å"in February 2005, the National Integration Center (NIC) gathered together several emergency management organizations to begin collaborating on NIMS implementation† (Federal Emergency Management Agency, 2007). With the above points in mind, as the emergency manager, I would the following agencies for finding causes into the disaster and managing the disaster. They would include the police, the national fire and rescue service, federal bureau of inve stigation (FBI), Red Cross society and the national media commission. Among these agencies, the national fire and rescue service would be the lead agency when I arrive. The national fire and rescue service would also be responsible for rescuing the crew and mitigating the fire. This is primarily because the fire and rescue service has a core mandate and responsibility of handling fire situations. Apart from the roles mentioned above that would be handed the fire and resc